熱鍍鋅防腐法 ：

　　Hot dip galvanizing anti-corrosion method:

　　主要用于受潮嚴重的戶外鋼材中。

　　Mainly used in outdoor steel materials that are severely affected by moisture.

　　將鋼結構部件浸入融金屬槽中，然后對其鍍覆，讓鋼材表面形成一層保護層，具有防腐的效果。

　　Immerse steel structural components into molten metal tanks and then coat them to form a protective layer on the surface of the steel, which has anti-corrosion effect.

　　上漆防腐法 ：

　　Painting and anti-corrosion method:

　　主要用于室內鋼材的處理。

　　Mainly used for processing indoor steel.

　　先將含有純鋅溶劑、改性劑等底漆涂刷于鋼材表面，讓其干固，能避免浸蝕物質浸入。

　　First, apply a primer containing pure zinc solvent, modifier, etc. onto the surface of the steel to allow it to dry and solidify, which can prevent the infiltration of corrosive substances.

　　電弧噴涂防腐法 ：

　　Arc spraying anti-corrosion method:

　　主要用于水中和地底下的構造件。

　　Mainly used for structural components in water and underground.

　　先將構件拋光除銹，再打毛，接著點燃電弧熔融金屬材料，將它噴漆在事先拋光的構件上，達到抗腐蝕耐磨損的效果。

　　First, polish and remove rust from the components, then roughen them. Then, ignite an arc to melt the metal material and spray it onto the pre polished components to achieve corrosion and wear resistance.

　　熱熔PE工藝 ：

　　Hot melt PE process:

　　在鍍鋅C型鋼表面再次進行熱熔PE材料，使金屬與外界的腐蝕水汽完全隔離，從而實現(xiàn)防腐的效果。

　　Re melt PE material on the surface of galvanized C-shaped steel to completely isolate the metal from external corrosive water vapor, thereby achieving anti-corrosion effect.

　　使用防銹劑 ：

　　Use rust inhibitor:

　　如-N轉銹金剛，這是一種稠狀液體的特種功能涂劑，具有除銹與防銹的雙重功能?？梢灾苯油ㄟ^刷、抹、噴等方式涂在銹蝕的鋼構件表面，形成高耐蝕膜層，作為底層，能有效提高油漆涂裝的防腐蝕質量。

　　Like - N to Rust King Kong, this is a special functional coating with a thick liquid that has dual functions of rust removal and rust prevention. It can be directly applied to the surface of corroded steel components through brushing, wiping, spraying, and other methods to form a highly corrosion-resistant film layer. As a bottom layer, it can effectively improve the anti-corrosion quality of paint coating.

　　表面清潔與干燥 ：

　　Surface cleaning and drying:

　　清洗必須依被防銹物表面的性質和當時的條件，選定適當?shù)姆椒?，如溶劑清洗法、化學處理清潔法和機械清潔法。

　　Cleaning must be carried out using appropriate methods such as solvent cleaning, chemical treatment cleaning, and mechanical cleaning, based on the properties of the rust resistant surface and the conditions at that time.

　　清洗干凈后可用過濾的干燥壓縮空氣吹干，或者用120~170 ℃的干燥器進行干燥，也可用干凈紗布擦干。

　　After cleaning, it can be dried with filtered dry compressed air, or dried with a dryer at 120-170 ℃, or wiped dry with clean gauze.

　　涂敷防銹油 ：

　　Apply anti rust oil:

　　浸泡法：一些小型物品采用浸泡在防銹油脂中，讓其表面粘附上一層防銹油脂的方法。

　　Soaking method: Some small items are soaked in rust proof grease to allow a layer of rust proof grease to adhere to their surface.

　　刷涂法：用于不適用浸泡或噴涂的室外建筑設備或特殊形狀的制品。

　　Brush coating method: used for outdoor building equipment or special shaped products that are not suitable for soaking or spraying.

　　噴霧法：一些大型防銹物不能采用浸泡法涂油，一般用大約0.7Mpa壓力的過濾壓縮空氣在空氣清潔地方進行噴涂。

　　Spray method: some large antirust materials cannot be oiled by immersion method. Generally, filtered compressed air with a pressure of about 0.7Mpa is used for spraying in an air clean place.

　　本文的精彩內容由濟南C型鋼廠提供知識提供，本網(wǎng)站還有很多的精彩內容，更多的內容您可以點擊進入：http://elpomelo.com我們有專門的客服為您解答問題

　　The exciting content of this article is provided by Jinan C-type Steel Plant. There are also many exciting contents on this website. For more content, you can click to enter: http://elpomelo.com We have dedicated customer service to answer your questions